Southwest Saw Corporation
Available Motors
An economical meat saw for the small, low-volume meat room
Model 22 Meat Saw
| HP | kW | Type | Volts | Amps | Hertz | Phase | Status |
| 1-1/2 | 1.1 | HH | 115/230 | 21.0/10.5 | 60 | 1 | STD |
| 1-1/2 | 1.1 | HH | 220/440 | 5.6/2.8 | 60 | 3 | STD |
| 1-1/2 | 1.1 | HH | 115/230 | 20.2/10.1 | 50 | 1 | EC |
| 1-1/2 | 1.1 | TE | 115/230 | 16.0/8.0 | 60 | 1 | EC |
| 1-1/2 | 1.1 | TE | 220/440 | 5.2/2.6 | 60 | 3 | EC |
| 1-1/2 | 1.1 | HH | 380/415 | 3.6/3.24 | 50 | 3 | STD |
| 1-1/2 | 1.1 | TE | 380/415 | 3.6/3.24 | 50 | 3 | EC |
SPECIFICATIONS:
FINISH: Stainless steel body. Cast head structure standard - Stainless steel
head structure, optional, EC.
TE = Totally enclosed STD = standard
HH = high humidity EC = extra cost
SWITCH: Toggle standard 2 HP rated placed conveniently in front.
SWITCH AVAILABLE OPTIONS: Net Extra: Waterproof magnetic type.
BASE STRUCTURE: Unitized welded stainless steel.
HEAD AND DOOR: Entire assembly removable.
BLADE GUIDE: Upper guide assembly removable. Steel guide with long-life carbide
back-up insert.
SAFETY PUSHER PLATE: Standard, removable.
DRIVE: Non slip silent V-belt.
PLATTER: All stainless steel held in place with two push pull hold down rods.
MEAT CARRIAGE: All stainless steel, with nylon guides.
CATCH PAN: Extra deep, rounded corners. Pan sealed off from other parts of the
base. Accessible through hinged door.
CLEANING UNIT: Stainless steel body, long life carbide guides, steel saw cleaners,
removable as a unit for easy cleaning (assembly also adjusted as a unit).
BEARINGS: Heavy duty taper roller bearings used in upper wheel and lower bearing
housings.
WHEELS: 12"; cast iron upper wheel assembly lifts out.
LEGS: Stainless steel leg bolt levelers.
MOTOR COMPARTMENT: Sealed off from meat contact areas. Easily accessed through
removable panel door.
BLADE TENSION: Adjustable, 3 inch travel ratchet gear, cam controlled embodying
pound tested spring, correct tension automatically assured.
MEAT GAUGE PLATE: Adjustable from 1/16" to 6 1/2", locks in position, can
be thrown out of gear, entire assembly removable for cleaning.
BLADE SPEED: Standard speed on 50 and 60 cycle operation approximately 3000 feet
per minute.
BLADE STANDARD: 4 point 5/8 wide .020 thick 91" long. Available: 2 Point x 5/8
wide .022 thick Scallop Blade.
ACCEPTANCE: UL, NSF, USDA, CSA
WEIGHT:
Uncrated 308 Ibs. (140 kg) approximately
Crated 370 Ibs. (168 kg) approximately
Last Update: 04/23/09